Standard (ASA)
$29 each
$48 per pair
Choose StandardDecorative Gutter End Caps
3D‑printed in UV‑stable ASA. Offered in popular standard gutter colors — plus a Premium Solid Copper option to match copper gutter systems.
- Fits most 5" & 6" K‑Style (Left/Right)
- Outdoor‑ready: UV, heat, and weather resistant
- Fast install with included stainless hardware
Made to order in the USA
Standard colors + Premium Copper
Nature‑Inspired Styles
Maple Leaf, Bear, Squirrel, Pinecone, Owl, Oak Leaf, Mountain—or go custom.
Fast Install
Mounts over your existing end caps. Stainless screws included. 5–10 minutes.
Built for Outdoors
ASA resists UV fading and heat. Light texture. Easy to clean. Paintable if desired.
No Flow Loss
Overlay faceplate only—keeps your original watertight seal and gutter capacity.
Gutter End Caps
Colors & Finishes
Match common gutter/trim colors or choose a premium solid copper faceplate for copper gutter systems.
Color previews are for screen reference; physical samples may vary. Don’t see your color? Choose Custom Match and we’ll nail it.
Premium Solid Copper
Crafted from real C110 copper sheet (not printed). Optional clearcoat to slow patina—or let it age naturally to a rich verdigris. Designed to match copper gutter systems.
- Material: 0.8–1.0 mm copper sheet
- Finish: Raw (patina) or Clear-coated (reduced patina)
- Hardware: Stainless included (copper hardware by request)
Premium Copper incurs an additional charge and lead time.
Pricing
Most buyers choose the pair for front-facing symmetry.
Copper-faced
$99 each
$169 per pair
Choose Copper-facedAdd $10 for custom color match or personalized engraving.
Install in 5–10 Minutes
- Dry fit over your existing left/right end cap.
- Mark & drill two pilot holes (3.0–3.2 mm / 1/8") through the end cap flange.
- Seal check your original end-cap seam; add a tiny bead of gutter sealant only if needed.
- Fasten with included stainless screws until snug (allow slight thermal movement).
- Touch-up any paint nicks with exterior enamel.
Specs
| Material | UV-stable ASA (standard) or Solid Copper (premium) |
|---|---|
| Shell (ASA) | ~3.0 mm with 4–5 perimeters; 35–45% gyroid infill |
| Layer height (ASA) | 0.24–0.28 mm (light texture) |
| Compatibility | 5" & 6" K-Style end caps (most brands) |
| Hardware | 18-8 stainless screws included |
Gallery
Customer installs and finish options.
FAQs
Will these reduce gutter capacity or cause overflow?
No. They overlay the end-cap face only and do not affect the gutter channel.
Do they fit vinyl gutters?
Yes—most K-style vinyl end caps share a similar face geometry. Always test fit before drilling.
Left vs. Right—how do I choose?
Face your home from outside. Left = the end cap on your left; Right = on your right.
Can I paint ASA parts to custom colors?
Yes. Lightly scuff and use an exterior enamel or clear UV topcoat. We can also produce a Custom Match on request.
Does copper change color?
Yes—raw copper will naturally darken and can develop patina. Choose clear-coated copper if you want to slow that process.
Ready to match your gutters?
Pick a standard color or upgrade to Premium Solid Copper. Printed/fabricated to order and ships with stainless hardware.
30-day returns (unused) · 1-year material & colorfastness warranty
Want something custom?
We can do monograms, house numbers, local wildlife, logos—or match a specific gutter/trim color. One-time art or color-match fee may apply.